Description
This connection kit connects your table water unit with hot water and 8 mm push-fit connections (5/16") straight to water and CO2. On site you only need a 3/4" angle valve (like for a washing machine) and a power socket.
Optionally with a filled 2 kg CO2 cylinder.
Scope of delivery
- Aquastop 3/4" with reset device – shuts off the water if a hose bursts
- Push-fit connector 3/4" × 8 mm for the angle valve
- Everpure QL3 filter head with wall bracket
- Everpure BH2 filter cartridge with scale protection – for units with hot water
- Water pressure reducer with gauge, 1–6 bar
- 4 push-fit connectors 3/8" male × 8 mm for filter head and pressure reducer
- CO2 pressure regulator up to 7 bar with push-fit connector 1/2" × 8 mm
- 8 m of 8 mm tubing for water and CO2
Suitable for
BLUGLASS HOT 30 Fizz and BluSoda 30 Fizz HOT.
Note: Set the water pressure to 2–3 bar and the CO2 pressure about 1 bar higher (Blupura: 3.5–4 bar); the exact values are in the manual of your unit. Under-counter units (Box) also need a water font or tap bar. A backflow preventer to DIN EN 1717 belongs on the water line; the angle valve usually has one, otherwise your plumber fits it.