Hoses & connections
Here you will find everything that connects keg, pressure regulator, cooler and tap: hoses by the metre or ready-made, and the matching connections.
- Beer hoses – ID 7 and ID 10 mm, ready-made with 5/8" nut, by the metre, on the roll or configurable with assembly.
- CO2 & air hoses – from the pressure regulator to the coupler, plus compressor hoses, with 3/4" connection.
- Connections & fittings – wing nuts and union nuts, hose tails, clamps, wall/counter couplings and adapters.
Good to know
On beer dispensing systems the beer connection usually has a 5/8 inch thread and the CO2 connection a 3/4 inch thread. The inner diameter of the beer hose should match the nominal width (NW) of the cooler: NW 7 is standard, NW 10 for high flow rates. Replacement seals can be found under seals & spare parts.
The beer hose carries the beer from the coupler to the cooler and...
The CO2 hose connects the pressure regulator on the CO2 cylinder...
With the right connections you can build, repair or extend beer...