Description
This connection kit connects your table water unit with 8 mm push-fit connections (5/16") straight to water and CO2. On site you only need a 3/4" angle valve (like for a washing machine) and a power socket.
Optionally with a filled 2 kg CO2 cylinder.
Scope of delivery
- Aquastop 3/4" with reset device – shuts off the water if a hose bursts
- Push-fit connector 3/4" × 8 mm for the angle valve
- Everpure QL3 filter head with wall bracket
- Everpure 4C filter cartridge for cold drinks, 11,350 l capacity
- Water pressure reducer with gauge, 1–6 bar
- 4 push-fit connectors 3/8" male × 8 mm for filter head and pressure reducer
- CO2 pressure regulator up to 7 bar with push-fit connector 1/2" × 8 mm
- 8 m of 8 mm tubing for water and CO2
Suitable for
BluSoda 30, 45 and Black 30, BLUGLASS 30, I.T. 80 and PLUS 80, Blubar 80, Cool1 80, Hydrazon 15, Piccola White 15, Box 30, 45, 60 and 80, Blupura carbonator.
Note: Set the water pressure to 2–3 bar and the CO2 pressure about 1 bar higher (Blupura: 3.5–4 bar); the exact values are in the manual of your unit. Under-counter units (Box) also need a water font or tap bar. A backflow preventer to DIN EN 1717 belongs on the water line; the angle valve usually has one, otherwise your plumber fits it.