Description
This connection kit connects your table water unit with threaded connections (water 3/8", CO2 1/2" BSF) straight to water and CO2. On site you only need a 3/4" angle valve (like for a washing machine) and a power socket.
Optionally with a filled 2 kg CO2 cylinder.
Scope of delivery
- Aquastop 3/4" with reset device – shuts off the water if a hose bursts
- Push-fit connector 3/4" × 8 mm for the angle valve
- Everpure QL3 filter head with wall bracket
- Everpure 4C filter cartridge for cold drinks, 11,350 l capacity
- Water pressure reducer with gauge, 1–6 bar
- 4 push-fit connectors 3/8" male × 8 mm for filter head and pressure reducer
- CO2 pressure regulator up to 7 bar with push-fit connector 1/2" × 8 mm
- Screw-on connector 3/8" female × 8 mm for the water inlet of the unit
- Screw-on adapter 1/2" BSF × 8 mm for the CO2 inlet of the unit
- 8 m of 8 mm tubing for water and CO2
Suitable for
Selbach AQUA QUBE CT30 (white and black), AQUA 50 UTK and AQUA 70 UTK, CW 220 carbonator, CT30, CT60 and CT30 POSEIDON.
Note: Selbach recommends 2.5 bar water pressure and 4 bar CO2 pressure; the exact values are in the manual of your unit. Units with outlets to a font or cooler (AQUA 50/70 UTK, CW 220 carbonator) need one more screw-on adapter 1/2" BSF × 8 mm (T-MM-24253) per outlet. A backflow preventer to DIN EN 1717 belongs on the water line; the angle valve usually has one, otherwise your plumber fits it.