CO2 & air hoses
The CO2 hose connects the pressure regulator on the CO2 cylinder to the coupler. On coolers with a built-in air compressor, a compressor hose does this job – then you do not need a CO2 cylinder.
Our range
- CO2 hoses ID 4 mm, 150 or 300 cm, with wing or hex nut 3/4" and straight hose tails.
- CO2 hoses 3/8", 150 or 300 cm, with two 3/4" push-fit connections.
- Compressor hoses ID 7 mm, 150 or 300 cm, with wing or hex nut 3/4".
- By the metre and on the roll: ID 4 mm soft and transparent, OD 8 mm hard and milky – suitable for CO2 and beer.
Good to know
The CO2 connection on pressure regulator and coupler usually has a 3/4 inch thread, the beer connection 5/8 inch. You will find the right regulator under pressure regulators, individual nuts, hose tails and seals under connections & fittings.
Items 1 - 14 of 14
Items 1 - 14 of 14