1.close all taps and valves
2.put the filler on the 5L can, secure the bracket with a screw.
3.connect CO2 hose to pressure reducer
4.Connect beer hose to brewing kettle, barrel etc.
5. screw on CO2 bottle, apply approx. 1.0 bar pressure to can.
6.open beer tap on kettle etc. and filling device
7.regulate the filling speed by opening the drain valve
8.the can is completely filled when beer can be seen in the drain hose
9.Close all taps and valves
10.Release residual pressure with drain valve
11.remove filling device
12.close the can with the "Hermetic sealing plug" from Wecomatic.