Connections & fittings
With the right connections you can build, repair or extend beer and CO2 lines yourself. Whether a single nut or a complete connection set – you will find the parts here.
Items 1 - 20 of 53
Items 1 - 20 of 53
What can I find here?
- Connection sets: wing or hex nut, straight or bent hose tail, seal and clamp – for beer hoses NW 7 and NW 10 (5/8") and CO2 hoses NW 4 (3/4").
- Nuts: wing nuts and union nuts in 5/8" for beer and 3/4" for CO2.
- Hose tails: straight or bent hose tails and stainless steel double hose tails for 4, 7 and 10 mm.
- Clamps: single-ear clamps for NW 4, 7 and 10, worm drive clamps and hose clamps.
- Wall/counter couplings with 5/8" thread in 80, 110 and 150 mm, for example to run lines through a counter or wall.
- Adapters: reducers and adapters between 3/4" and 5/8", double-thread nipples, elbow fittings, push-fit connectors for 3/8" and 5/16" lines and a beer shut-off valve.
Tip
The hose tail must match the hose: 7 mm tail for hose ID 7, 10 mm tail for ID 10. Matching seals can be found under seals & spare parts, ready-made hoses under beer hoses and CO2 & air hoses.