Reinigungsbehälter 5 L aus Kunststoff | Konfigurierbar

Bevi Power alkaline

1.connect the Bevi to the cleaning device as described in the separate instructions.

2.Pre-rinse the line with a cleaning sponge and tap water.

3.Then dissolve the contents of the bag in 5 litres of water, making sure that it is completely dissolved.

4.pump application solution with cleaning sponge in alternating circulation for approx. 15 minutes.

5.In case of chemical cleaning, the contact time should be 15-20 minutes.

6.Rinse thoroughly with tap water. Ensure that the system is cleaning agents in the system.

Check e.g. with pH indicator paper.

Ingredients: Sodium carbonate, phosphonates, additives. 100g contain 4.0g troclosene sodium

This is a biocidal product.

Use biocidal products with care. Always read the label and product information before use.

1. connect Bevi/cleaning device as described in separate instructions.

2.Pre-rinse the line with a cleaning sponge and tap water.

3.Then dissolve the contents of the bag in 5 litres of water, making sure that it is completely dissolved. 4.
4. pump application solution with cleaning sponge in alternating circulation for approx. 15 minutes.

5. in case of chemical cleaning, the contact time should be 15-20 minutes.

6. Rinse adequately with tap water. Ensure that the system is free of cleaning agents.

Check e.g. with pH indicator paper.
Ingredients: Sodium carbonate, phosphonates, additives. 100g contain 4.0g troclosene sodium.

This is a biocidal product.

Use biocidal products with care. Always read the label and product information before use.

Bevi Power alkaline

1.connect the Bevi to the cleaning device as described in the separate instructions.

2.Pre-rinse the line with a cleaning sponge and tap water.

3.Then dissolve the contents of the bag in 5 litres of water, making sure that it is completely dissolved.

4.pump application solution with cleaning sponge in alternating circulation for approx. 15 minutes.

5.In case of chemical cleaning, the contact time should be 15-20 minutes.

6.Rinse thoroughly with tap water. Ensure that the system is cleaning agents in the system.

Check e.g. with pH indicator paper.

Ingredients: Sodium carbonate, phosphonates, additives. 100g contain 4.0g troclosene sodium

This is a biocidal product.

Use biocidal products with care. Always read the label and product information before use.

Quick disinfection
Surfaces, dispensing heads & taps

Method of use :Spray undiluted onto surfaces. Recommended exposure time for surface disinfection 1 minute (bacteria, fungi, viruses, etc.).

Keep out of the reach of children.  Avoid contact with eyes. Not a hazardous substance as defined by the CLP Regulation, without alcohol, surfactants and aldehydes, non-flammable.Ready-to-use aqueous solution.

This is a biocidal product.

Use biocidal products with care. Always read the label and product information before use.

Bevi Liquid Dosing Bottle

Alkaline basic cleaning agent for heavily soiled beverage lines.

Instructions for use:

1. prepare the 2-3% cleaning solution and stir.

2. pre-rinse the lines with drinking water and then apply the solution. through the lines for max. 15 minutes.

3. for chemical stand cleaning, the contact time should be max. 20 minutes.

4. then rinse thoroughly with drinking water. (Check: e.g. ph indicator paper).

This is a biocidal product.

Use biocidal products with care. Always read the label and product information before use.

KEG cleaning brushes with plastic handle Flat and combi-fitting systems

KEG cleaning brushes with plastic handle Basket fitting systems

Tap brush with plastic handle NW 10 mm, 24 cm long

Tap brush with plastic handle NW 7 mm, 16.5 cm long